Genuine product

6001 2RS ORS Bearing

ORS · Deep groove ball bearing · Rubber seals on both sides · 12×28×8 mm

Deep groove ball Double seal In stock

Ask on WhatsApp +90 551 108 63 78 Request a quote

Our shop: Esenler Oto Sanayi Sitesi, İkitelli OSB

6001 2RS ORS is a deep groove ball bearing with a 12 mm bore, 28 mm outside diameter and 8 mm width, sealed on both sides with rubber seals.

Deep groove ball bearing sealed on both sides; C3 internal clearance according to the code on the box.

Dimensions

Bore (d)12 mm

Outside diameter (D)28 mm

Width (B)8 mm

Chamfer (r min)0.3 mm

Weight≈ 0.0211 kg

Balls8 × ≈4.72 mm

Load ratings and speed

Dynamic load rating C5.4 kN

Static load rating C₀2.36 kN

Limiting speed≈ 16,500 rpm

Reference speed (grease)≈ 46,000 rpm

Rubber seals on both sides, greased for life. The best protection against dust and water; seal friction keeps its speed below the shielded version. For damp and dirty conditions.

Where it is used

Small electric motor shaft bearing (0.12–0.37 kW) Extractor fan, range hood and air conditioner outdoor unit fan motor Bicycle hub, bottom bracket (BB) and pedals with bearings Kick-start, clutch and small transmission shafts in motorcycles / scooters Aquarium, pool and water heater circulation pump shaft Power tools such as drills, grinders and jigsaws GENERAL-PURPOSE SIZE: very common light series for a 12 mm shaft, not tied to any single industry

6001-2RS – all our products in this size (3)

6001 2RS ORS Bearing

Dimensions

Load ratings and speed

Where it is used

Similar products