Genuine product

6309 2RS ORS Bearing

ORS · Deep groove ball bearing · Rubber seals on both sides · 45×100×25 mm

Deep groove ball Double seal In stock

Ask on WhatsApp +90 551 108 63 78 Request a quote

Our shop: Esenler Oto Sanayi Sitesi, İkitelli OSB

6309 2RS ORS is a deep groove ball bearing with a 45 mm bore, 100 mm outside diameter and 25 mm width, sealed on both sides with rubber seals.

Deep groove ball bearing sealed on both sides; C3 internal clearance according to the code on the box.

Dimensions

Bore (d)45 mm

Outside diameter (D)100 mm

Width (B)25 mm

Chamfer (r min)1.5 mm

Weight≈ 0.8236 kg

Balls9 × ≈16.22 mm

Load ratings and speed

Dynamic load rating C55.3 kN

Static load rating C₀31.5 kN

Limiting speed≈ 4,400 rpm

Reference speed (grease)≈ 12,500 rpm

Rubber seals on both sides, greased for life. The best protection against dust and water; seal friction keeps its speed below the shielded version. For damp and dirty conditions.

Where it is used

Electric motor shaft bearing (approx. 15–30 kW, 132–160 frame motors) Centrifugal water pump and circulation pump housing bearing Tractor transmission / clutch shaft and rear axle auxiliary bearings Belt conveyor drive and tail drum Gear reducer input/output shaft, belt pulley shaft Radial fan, extractor fan and dust collection blower shaft Concrete mixer, mortar mixer and feed mixer shaft A highly general-purpose size: not specific to any single machine, it is one of the best-selling 63 series sizes in industry

6309-2RS – all our products in this size (4)

6309 2RS ORS Bearing

Dimensions

Load ratings and speed

Where it is used

Similar products