HFL 0615 INA Drawn cup roller clutch

INA · Drawn cup roller clutch · 6×10×15 mm

HFL 0615 INA (drawn cup roller clutch): bore 6 mm, outside diameter 10 mm, width 15 mm.

Drawn cup roller clutch with bearing support (HFL): bearing supports sit on both sides of the clutch; it turns freely in one direction, locks onto the shaft in the other to transmit torque and also carries radial load. It has no inner ring and runs directly on a hardened shaft; shaft diameter 6 mm, outside diameter 10 mm, width 15 mm. Permissible torque 1.76 Nm; limiting speed 23,000 rpm with rotating shaft, 13,000 rpm with rotating outer ring.

Dimensions

Load ratings and speed

Where it is used