HFL 1022 INA Drawn cup roller clutch

INA · Drawn cup roller clutch · 10×14×22 mm

HFL 1022 INA (drawn cup roller clutch): bore 10 mm, outside diameter 14 mm, width 22 mm.

Drawn cup roller clutch with bearing support (HFL): needle roller bearings sit on both sides of the clutch; it turns freely in one direction, locks onto the shaft in the other to transmit torque and also carries radial load. It has no inner ring and runs directly on a hardened shaft; shaft diameter 10 mm, outside diameter 14 mm, width 22 mm. Permissible torque 5.3 Nm; limiting speed 14,000 rpm with rotating shaft, 11,000 rpm with rotating outer ring.

Dimensions

Load ratings and speed

Where it is used