HFL 2026 INA Drawn cup roller clutch

INA · Drawn cup roller clutch · 20×26×26 mm

HFL 2026 INA (drawn cup roller clutch): bore 20 mm, outside diameter 26 mm, width 26 mm.

Drawn cup roller clutch with bearing support (HFL): needle roller bearings sit on both sides of the clutch; it turns freely in one direction, locks onto the shaft in the other to transmit torque and also carries radial load. It has no inner ring and runs directly on a hardened shaft; shaft diameter 20 mm, outside diameter 26 mm, width 26 mm. Permissible torque 28.5 Nm; limiting speed 7,000 rpm with rotating shaft, 6,500 rpm with rotating outer ring.

Dimensions

Load ratings and speed

Where it is used