HFL 2530-L564 INA Drawn cup roller clutch

INA · Drawn cup roller clutch · 25×32×30 mm

HFL 2530-L564 INA (drawn cup roller clutch): bore 25 mm, outside diameter 32 mm, width 30 mm.

Drawn cup roller clutch with bearing support (HFL): needle roller bearings sit on both sides of the clutch; it turns freely in one direction, locks onto the shaft in the other to transmit torque and also carries radial load. It has no inner ring and runs directly on a hardened shaft; shaft diameter 25 mm, outside diameter 32 mm, width 30 mm. Permissible torque 66 Nm; limiting speed 5,500 rpm.

Dimensions

Load ratings and speed

Where it is used