HFL 3530 INA Drawn cup roller clutch

INA · Drawn cup roller clutch · 35×42×30 mm

HFL 3530 INA (drawn cup roller clutch): bore 35 mm, outside diameter 42 mm, width 30 mm.

Drawn cup roller clutch with bearing support (HFL): needle roller bearings sit on both sides of the clutch; it turns freely in one direction, locks onto the shaft in the other to transmit torque and also carries radial load. It has no inner ring and runs directly on a hardened shaft; shaft diameter 35 mm, outside diameter 42 mm, width 30 mm. Permissible torque 121 Nm; limiting speed 3,900 rpm.

Dimensions

Load ratings and speed

Where it is used